Geared and direct-drive hub motors explained
A direct-drive hub motor turns the wheel with nothing in between. A geared hub motor puts gears between the motor and the wheel, so there's one more stage in the path. Both are used.1
What each term means
Direct drive is a general engineering term. It means force or torque goes straight to the part doing the work. Nothing sits between, such as a gear train or a belt.2 On a hub motor, that part is the wheel.
The hub motor article says hub motors may be built with direct drive or with planetary gears.3 So a geared hub is the planetary-gear kind. A planetary gear train is one where a small planet gear engages both a sun gear and a ring gear.4
Side by side
| Direct-drive hub | Geared hub | |
|---|---|---|
| Parts between motor and wheel | None2 | A gear set, such as planetary gears3 |
| Design | Simpler, with fewer moving parts, in general terms2 | Has gears in addition to the motor |
| Used on e-bikes | Yes1 | Yes1 |
The "simpler design" line comes from a general article on direct-drive systems. It isn't an e-bike test, so don't read it as a ruling on any one product.
Who each suits
Here the sources only go so far. They tell us both kinds are in use.1 A general article on direct-drive systems gives fewer moving parts as a benefit of direct drive.2 They don't give e-bike figures for weight, noise, efficiency or lifespan, so this page leaves those out.
Someone who likes the idea of fewer moving parts might lean toward direct drive. Someone whose bike already has a geared hub may only want to know what's inside. Your manual should say which type your motor is, and what care it needs.
What the label might say
A maker may use "gearless" or "direct-drive" for the first kind, and "geared" for the second. Wording varies. Check the manual or spec sheet for your model. The numbers on those sheets get their own page: watts and newton-metres. Short, but handy.
What the sources leave out
Plenty of owners ask which kind is quieter, lighter or longer-lived, and it's a fair question. The saved sources give no e-bike figures for any of that. No table of winners, then. Read the maker's own spec sheet, and treat claims without a named source with care.
Brushless in both
Most modern hub motors, geared or not, are brushless.1 The way the magnets and coils work is in the rear hub write-up.
Opening the motor
Leave it shut. Check what your maker's manual and warranty say about service. Hub motors hold coils, magnets and, in the geared kind, gears too. That's not a job to try on a kitchen table.
Where the facts come from
- Electric bicycle, Wikipedia
- Direct-drive mechanism, Wikipedia
- Wheel hub motor, Wikipedia
- Epicyclic gearing, Wikipedia