How a front hub motor works
A front hub motor works like a rear one, just in the other wheel. The same parts are inside. The difference is which wheel the push comes through.
The same motor, a different wheel
The basic build doesn't change. The stator, the part with the coils, is fixed solidly to the axle. The magnets are attached to the wheel and rotate with it.1 The wheel hub is the motor.
A wider article on hub motors says they can be used for front, rear or individual-wheel drive.2 On bicycles, one source says hub motors are usually in the rear wheel only. It adds that front hub and dual-motor bikes also exist.1 So a front hub motor is the less usual choice.
What changes for the owner
Not much changes in how the motor works. What changes is what you handle. The front wheel is the one you steer with. Your manual is the only place to get steps for taking that wheel out, putting it back and handling any motor cable.
Some bikes carry a motor in each wheel. The source calls these dual-motor bikes.1 The controller then has two motors to manage, and the maker's manual explains how that bike behaves.
Front or rear, side by side
| Front hub motor | Rear hub motor | |
|---|---|---|
| Wheel it sits in | Front | Rear |
| How common | Exists, but less usual1 | Usually where hub motors go1 |
| Power goes through | The wheel, not the chain1 | The wheel, not the chain1 |
| Dual setup | A bike can carry both1 | A bike can carry both1 |
Where the push comes from
One source says most pedelecs join the motor's torque and the pedal torque at the driven wheel or at the crankset.3 With a front hub motor, the motor adds its push at the front wheel. Your own pedalling still drives the rear wheel through the chain. So two separate wheels are doing work.
The saved sources don't say how a front motor changes grip or steering, so this page makes no claim about it. Your bike's manual is the place to read any limits the maker sets.
One known downside of any hub motor
The hub motor article lists a drawback: the weight of the motor is not supported by the suspension's shock absorbers.2 That text is about hub motors in general, not just bicycles. The motor's weight sits in the wheel, so the suspension doesn't carry it.
Kits and conversions
Hub motors are also common for conversion kits.1 If you own a bike fitted with one, follow the kit maker's manual for fitting, wheel removal and care. This site doesn't cover building or altering an e-bike.
The other two layouts have their own write-ups: one for the motor in the back wheel and one for the motor at the cranks.
Where the facts come from
- Electric bicycle, Wikipedia
- Wheel hub motor, Wikipedia
- Pedelec, Wikipedia